Manufacture of Engineer Certified Steel Buildings For World-Wide Use Since 1992.

 

 

 

Factory Building Projects

You'll Like Our Prices: 

But You'll Simply Love Our Service.

 

Please Navigate Below

People forget how fast you did a job, but remember how well you did it. 

Site Map

Home/ About Us

A Little Gem About Foundations

Building, Extending or Renovating A Factory

Our Steel Factory Building DIY Kits

Steel Building Pointer Arrow

Steel Buildings - Some Do's & Don'ts

Steel Building Pointer Arrow

Steel Building Quote Comparison Checklist

Financing Your Building Projects

Copyright & Disclaimer

 

If you're looking for a reputable builder to erect your structure/s; go take a look at:

www.building-sa.co.za

 

On the other hand; you may want to do minor extentions or renovations to your existing factory or warehouse. Go to the following website:

www.bresbou.150m.com

 

And then, once you've built your factory and you want to protect your vehicles from sun and hail damage you should go to website:

shadeports.1afm.com

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our Steel Factory Building DIY Kits

The ease of erection of our portal frame steel structures makes it possible for you to purchase your factory in D.I.Y kit form and erect it yourself. A variety of commercial operations can take advantage of these D.I.Y steel building kits as the structures can be pre-configured to be appropriate for your special uses.

Great care must however be taken to ensure that we understand your requirements so that we can supply the right structure and accessories for the purpose intended. Our D.I.Y factory building kits have been developed to provide you with rapid deliveries at the most competitive pricing possible. This service is available throughout Africa via our Buildings In A Box System.

You can of course construct your end walls using steel or brick construction; frame in doors and windows as necessary and get any finished look to suit your taste. You can also use conventional insulation methods to insulate the building for heating and cooling efficiency.

Each D.I.Y. kit comes fully protected with red-oxide primer. The water-based, environmentally friendly red-oxide primer is designed to protect the steel before it is erected. When properly applied, it holds up against all but the worst abuse (like allowing water to pool for weeks on un-erected parts). As a result, any exposed red iron inside your building will look good for years, and you can finish it to look even better.

Every D.I.Y building is made at our state-of-the-art factory – so you enjoy factory-direct savings. Dealing directly with the factory saves you time and money, and ensures that you get the lowest price available anywhere. 

Buildings In A Box System Kits

Our export buildings are individually containerised for delivery to any building site on earth. Each shipping container has all of the material needed to assemble the building in the field. A building can be erected quickly upon delivery provided that a foundation is already in place and the necessary utility services set up onsite (when applicable). 

The unique modular structure also allows for rapid development and cost-effective expansion.

Your steel erection crew will need to have appropriate tools available to complete the building assembly (but, it's not much - take a look at right!). If needed, we can even provide the necessary tools in the shipping container.

Our standard structures are supplied with 0,5 Full Hard Galvanised IBR Roof sheeting and all fasteners, including foundation bolts.

And includes all the instructions needed for easy, simple, and fast erection.

 

Warning: Safety requires a commitment from everyone involved. Although erecting a bolt-together pre-engineered steel building does not require specialized skills like carpentry or masonry and many of our customers do it themselves, construction work is dangerous, and larger buildings bring larger hazards.

Everyone at the site should wear appropriate protective clothing, including:

  • Hard hats

  • Gloves

  • Rubber-soled shoes

  • Eye-protection

On the up side, your erectors will have an outstanding set of clear common-sense drawings and can call on us for support if necessary.

These kits are suitable for:
 

 

 

 

 

 

 

 

 

 

x
 

 

 

 

 

 

 

 

 

 

x
 

 

 

 

 

 

 

 

 

 

x
 

 

 

 

 

 

 

 

  • All farming requirements from simple storage to house farm implements, hay, grain, poultry, livestock or other agricultural products to animal feeding and breeding buildings, like poultry housing
    - Broiler, breeder, laying and rearing houses
    -
    Commercial laying houses and pullet rearing
    - Egg packing stations, hatcheries and bio-security facilities.

  • Food processing factories

  • Meat packing plants

  • Diesel workshops

  • Boat lockers

  • Essential oils distillation plants

  • Various small manufacturing operations

  • A precision engineering workshop

  • Farm sheds

  • Live chicken retail outlets

  • Warehousing

  • Church halls

  • Shops

  • Large Carports

  • Indoor Swimming Pools

  • Conference Halls

  • Studios

  • Fitness Centres

  • Retail Showrooms

  • Automobile Dealerships

  • Garages (service facilities for trucks and other vehicles)

  • Trade Shops

  • Industrial Shops

  • Convenience Stores

  • Small aircraft hangars

  • Boat building or storage sheds, farm sheds, and any other kind of storage

Please take some advice from us on the point of D.I.Y kits. Don't just focus on price: focus on cost.

If the first question you're asking is "how much is it?" you may be guilty of focusing on the price instead of the cost. Depending on how you want to use your building, the cheapest purchase price may not be the cheapest overall cost. (Price and cost are different!).

For instance, our price includes the design, the drawings, and the materials for the basic structure. But the building will also need some type of foundation (see also page A Little Gem About Foundations), and its construction will require labour, some tools, and in some cases with bigger buildings, even a crane. After that, the project cost will depend on your finishes. As you add features like electrical, heating and cooling, plumbing, flooring, landscaping, etc., the costs rise accordingly.

There are a wide variety of additional extras available to compliment our buildings: 

  • Alu-cushion Insulation under Roof Sheeting 

  • Chromadek sheeting

  • Side cladding

  • Ventilation

  • Sliding Doors

  • Roller Shutter Doors

  • Personnel Doors

  • Windows

  • Bull-noses

  • Gable Cladding

  • Clear polycarbonate sheeting

  • Apart from being able to house overhead cranes the buildings can be designed to provide additional support for the crane structure. We can also provide the additional steel for any building utilizing overhead cranes.

Here's a sketch plan showing the various bits and pieces in a typical small industrial building:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 We seek to deliver consistent perfection and quality in the realm of all our DIY kits.

Try us: you may just experience enormous benefits.

building - mba

building - contact details

Bresbou Construction CC, Pendulum Construction CC,

Monyakus Construction CC and Universal Coverings (Pty) Ltd

Tel: (011) 453 4401

Cell: 084 303 8179

Fax: 086 640 4667 (Local SA Faxes ONLY)

E-mail: factory@steel-building-projects.com  

building - top

Best viewed at 800x600 pixels with Internet Explorer 5.5 - text size medium

Copyright © The Bresbou Construction Group. All Rights Reserved. Design by Ades Design/SA OptDesign